Orion Car Audio HCCA-D1200 - Manual (Page 3)

INTRODUCTION
Thank you for your purchase of Orion's HCCA-D1200, HCCA-D2400, or HCCA-D5000 power
amplifier. Each Orion amplifier is designed to be the leader in its class offering the most
power, advanced features, and extreme ease of use. In high-end sound systems or high SPL
systems, Orion amplifiers will give you years of trouble-free performance.
● HCCA-D1200 - 1200 Watt single-channel Class D amplifier with built-in infrason-
ic filter, with INTELLi-Q, ESP2, and remote bass. The HCCA-D1200 is capable of
one-channel operation with a maximum power of 1200 Watts into 1W.
● HCCA-D2400 - 2400 Watt single-channel Class D amplifier with built-in infrason-
ic filter, with INTELLi-Q, ESP2, and remote bass. The HCCA-D1200 is capable of
one-channel operation with a maximum power of 2400 Watts into 1W.
● HCCA-D5000 - 5000 Watt single-channel Class D amplifier with built-in infrason-
ic filter, with INTELLi-Q, ESP2, and remote bass. The HCCA-D5000 is capable of
one-channel operation with a maximum power of 5000 Watts into 1W.
Each of these amplifiers has security and programmable features controlled via a ESP ® -2
serial databus and Directed's proprietary Bitwriter ® tool (998T). The Bitwriter ® unit must
have version 2.3 or above to access the amplifier features menu.
The installation of all Orion components will determine the overall performance result.
Improper installation will not only limit the performance of your Orion system but also
potentially compromise the reliability of this amplifier. To ensure proper sonic results and
component reliability, please refer to your authorized Orion dealer for installation assis-
tance or advice. If you decide to perform the installation yourself, be sure to read the entire
manual before beginning the installation.
What’s in the Box
● (1) Amplifier
● (1) Spare fuse(s)
● (1) Allen wrench 2.5mm
● (1) Allen wrench 3mm
● (8) #8 self-tapping black Phillips head pan head screws
● (4) flat washers with adhesive
● (1) 3’ phono cable
● (1) 15’ ESP cable (amplifier to security system cable)
● (1) Amplifier installation and operation manual
● (1) Window decal
IMPORTANT NOTE
Prior to servicing your vehicle ensure that the alarm system is disarmed. Due to the ampli-
fier’s anti-theft feature (if enabled), if the main power to the amplifier is removed while the
security system is armed the amplifier operation is disabled. To reset the amplifier, refer to
Appendix—Programmable Features.
2 © 2005 Directed Electronics, all rights reserved