Oki 3100e - Manual (Page 75)

English
Chapter 5 - Utilities Installation 69
Network] tag. If they are not found, add them in
the following procedure:
(a) Click on [Add...] in the [Set Network] tag
and open [Add network configuration
file(s)].
(b) Select [Protocol] in the [Network
configuration file to be installed:], then click
on [Add...] and open [Select network
protocol] window.
(c) Select [Microsoft] in the [Manufacturers],
then [TCP/IP] in the [Network protocols:]
and click on [OK].
(d) Make sure that TCP/IP has been added to
[Current network configuration] of [Set
Network] tag.
3. Select TCP/IP from the [Current network
configuration:] list, open [Properties] and set the
following items:
(a) IP Address
(b) Subnet mask
(c) Gateway
(d) DNS
Note: If you do not know the values to set, consult
the network administrator.
4. Restart the computer after completing the setting
of TCP/IP.
Printer driver setup
1. Double-click on [Printers], then double-click on
[Add Printer].
2. [Add Printer Wizard] is displayed. Insert the
printer driver CD-ROM into the CD drive.
3. Follow the on-screen instructions and install the
printer driver selecting the printer as default
printer and local printer.
LPR installation and uninstall
Installation
1. Insert the software CD-ROM into the CD-ROM
drive.
2. Click on [Start] - [Run].
3. Type D:\OKILPR\SETUP (where D:\ is the drive
letter of your CD-ROM drive).
4. Follow the on-screen installation instructions.
3100euGB.book Page 69 Friday, March 16, 2001 1:18 PM