Oki 3100e - Manual (Page 57)

English
Chapter 4 - Administrating Network Printers 51
Status - - ‘2’
NetWare R-Printer Mode Status - - ‘3’
EtherTalk Status - - ‘4’
EXIT - - ‘0’
Type “4” and press the Enter key. Then the current
settings are displayed.
2. Change the settings.
OkiPage> set protocol [Enter]
<>
TCP/IP=1 NetWare=2 EtherTalk=3 EXIT=0 : 3 [Enter]
Will you use EtherTalk? (y/n) : y [Enter]Enter “n” if you will not use EtherTalkAppleTalk Zone Name (1-32char) : * [Enter]
AppleTalk Printer name (1-32char) : OKIPAGE 14i
Are you re-setting? (y/n) : n [Enter]
OkiPage> logout (or exit, quit) [Enter]Enter an appropriate command without logging
out, if you want to set other protocols.Setting NetBEUI environmentDisplay/set the NetBEUI environment.DisplayCommand to use:showprotocolorshproTarget account:General users and
administrator userSetCommand to use:set protocol or seproTarget account:Administrator userThe NetBEUI environment has the following items to be set:NetBIOS Computer Name: Set the name of the
printer.NetBIOS Workgroup Name: Specify the workgroup
to which the printer belongs.NetBIOS Comment: Set the explanation of the printer.Setting procedureHere, the setting procedure is explained using an example and
using the setting values shown below:NetBIOS Computer name: OP04106C
NetBIOS Workgroup name: OKIDATA04106C
NetBIOS Comment:OKIDATA Print Server1.Confirm the current settings.OkiPage>show protocol.<>NetWare Q-Server Mode (bindery) Status‘1’NetWare Q-Server Mode (NDS) Status- - ‘2’NetWare R-Printer Mode Status- - ‘3’EtherTalk Status- - ‘4’NetBEUI Status- - ‘5’SNMP Status- - ‘6’EXIT- - ‘0’Type “5” and press the Enter key. Then the current
settings are displayed.3100euGB.book Page 51 Friday, March 16, 2001 1:18 PM Pages: 1 … 55 56 57 58 59 … 104 wrong Brand wrong Model non readable See also other documents in the category Oki Hardware: VK2000 (11 pages) MSM66201 (31 pages) RS232-C (1 page) 7300e (141 pages) 6120i (219 pages) 70047601 (1 page) lan 3100e (104 pages) POSTSCRIPT 3TM 70049601 (2 pages) lan 310Eplus (2 pages) JOB60851 (67 pages) 70037501 (16 pages) MSM83C154S (36 pages) lan 7100e+ (50 pages) lan 6020E (226 pages) 70037301 (16 pages) 70043501 (20 pages) Telephony Adapter (30 pages) C6100dn (128 pages) 59375102 (12 pages) BMG7011 (70 pages) 8100e (106 pages) lan 8100e (140 pages) 70043502 (16 pages) 1.2 (60 pages) Sitemap
Enter “n” if you will not use EtherTalk
AppleTalk Zone Name (1-32char) : * [Enter]
AppleTalk Printer name (1-32char) : OKIPAGE 14i
Are you re-setting? (y/n) : n [Enter]
OkiPage> logout (or exit, quit) [Enter]
Enter an appropriate command without logging
out, if you want to set other protocols.
Setting NetBEUI environment
Display/set the NetBEUI environment.
Display Command to use: show protocol or
shpro
Target account: General users and
administrator user
Set Command to use: set protocol or sepro
Target account: Administrator user
The NetBEUI environment has the following items to be set:
NetBIOS Computer Name: Set the name of the
printer.
NetBIOS Workgroup Name: Specify the workgroup
to which the printer belongs.
NetBIOS Comment: Set the explanation of the printer.
Setting procedure
Here, the setting procedure is explained using an example and
using the setting values shown below:
NetBIOS Computer name: OP04106C
NetBIOS Workgroup name: OKIDATA04106C
NetBIOS Comment:
OKIDATA Print Server
1. Confirm the current settings.
OkiPage>show protocol.
<>
NetWare Q-Server Mode (bindery) Status ‘1’
NetWare Q-Server Mode (NDS) Status - - ‘2’
NetWare R-Printer Mode Status - - ‘3’
EtherTalk Status - - ‘4’
NetBEUI Status - - ‘5’
SNMP Status - - ‘6’
EXIT - - ‘0’
Type “5” and press the Enter key. Then the current
settings are displayed.
3100euGB.book Page 51 Friday, March 16, 2001 1:18 PM