Oricom CARE80 User Manual

Page 7

Installation

Method B. Attach directly to a wall
1. Drill two holes vertically, one above the other, 83mm apart, and leave

the screws protruding from the wall by 5mm.

2. Follow steps 1 and 2 above.
3. Then press down and slide the bracket upward until the tabs snap into

place.

4. Plug one end of the telephone cable into the

TEL. LINE jack at the

back of the base.

5. Plug the other end of the telephone cable into the telephone socket,

then align the base’s keyhole slots with the screws and slide the phone
downward to secure it.