Olympus WS-500M - Manual (Page 15)

15
1
+− button
9 0 button
OK
` button
LIST button
HOLD/Setting time and date [Time & Date]
H
O
LD
/S
et
ting
time
and
da
te
If you set the time and date beforehand,
the information when the file is recorded is
automatically stored for each file. Setting
the time and date beforehand enables easier
file management.
When you use the recorder for the
first time after purchasing it, or when
the batteries have been inserted
without the device having been
used in a long time, the [Set Time &
Date
] will appear. When the “hour”
is flashing, conduct the setup from
Step 1.
1
Press the
9 or 0 button to
select the item to set.
• Select the item from the “hour”,
“minute”, “year”, “month” and “day”
with a flashing point.
2
Press the + or − button to set.
• Follow the same steps by pressing the
9 or 0 button to select the next
item, and press the + or − button to
set.
• You can select between 12 and 24
hour display by pressing the LIST
button while setting the hour and
minute.
Example: 10:38 P.M
10:38 PM
(Initial setting)
22:38
• You can select the order of the
“month”, “day” and “year” by
pressing the LIST button while
setting them.
Example: April 15, 2009
4 M 15 D 2009 Y (Initial setting)
15
D
4
M
2009
Y
2009 Y 4 M 15 D
3
Press the OK
` button to
complete the setting.
• If HOLD is applied during playback
(recording), operation is disabled with
the playback (recording) state unchanged
(When playback has ended and the
recording has ended due to the remaining
memory being used up, it will stop).
Setting time and date
[Time & Date]