Olympus WS-500M - Manual (Page 14)

14
1
Power supply
Po
we
r s
u
p
p
ly
/H
O
LD
HOLD
Set the recorder to HOLD mode
While the recorder is during stop
mode, slide the HOLD switch in the
direction indicated by the arrow.
If you bring the recorder is set to HOLD
mode, the running conditions will be
preserved, and all buttons will be disabled.
This feature is useful when the recorder has
to be carried in a bag or pocket.
• After [Hold] appears on the display, the
recorder is set to HOLD mode.
Exit HOLD mode
Slide the HOLD switch in the
opposite direction that indicated by
the arrow.
Notes
• If you press any button in HOLD mode, the
clock display fl ashes for 2 seconds, but it
will not operate the recorder.
Turning off the power
While the recorder is during stop
mode, slide the HOLD switch in the
direction indicated by the arrow.
• The display shuts off, and the power will
be turned off.
• The resume function remembers the stop
position before the power is turned off.
Power save mode
If the recorder is stopped/not used for over
5 minutes after it is turned on, it goes into
standby (power-save) mode, and the display
shuts off.
• To exit standby mode and turn on the
display, press any button.