Oricom P900 User Manual
Page 26
26
Deleting the memo
1. Press while listening to the memo. The memo will be deleted.
Call screening
Call screening allows you to hear the caller before you pick up the call
by turning on the answering machine’s speaker during the recording of
incoming messages.
To turn call screening on/off
1. Press during standby. The 7-segment LCD displays
On
if call
screening is activated or
Of
if call screening is deactivated.
Message alert
Message alert gives you an indication that there is new message(s)
saved in the answering machine by emitting a short beep periodically
when there is new message(s).
To turn on/off message alert,
1. Press during standby. The 7-segment LCD displays
On
if message
alert is activated or
Of
if message alert is deactivated.
Volume adjustment
You can adjust the volume of call screening and message playback.
During standby, call screening or message playback,
1. Press to increase and to decrease the volume.
Ring delay
You can set the number of times the answering machine would ring
before it answers the call. This only applies when the answering machine
is turned on.
The time saver option is useful when using the remote access feature.
When the time saver option is selected, the answering machine will ring
four times if no new messages are recorded or two times if there is a new
message.
NOTE: Memo will also be deleted by deleting all function. (See the
Section: Deleting All ICMs function)
VOL+
VOL-