Oricom P900 - Manual (Page 13)

13
Take two different calls at the same time
If you have subscribed to your telephone network operators Call Waiting
Caller ID service, your phone will display the number of the second
incoming call for around 60 seconds while you are talking on the phone.
During a call, you will hear two loud beeps periodically to notify you of
another incoming call. If you wish to answer this call
1. When the handset receives a second call, the number of the caller
appears on the display. It will display for 60 seconds or until you
press a key on the phone. Press listen for dial tone then
Press 2 to put the current call on hold and talk with the second caller.
2. Subsequent presses of listen for dial tone then Press 2 will
toggle you between these 2 callers.
Caller information of this second call will be stored in the call log.
CALLER ID
If you subscribe to the Caller ID service, your phone automatically stores
the last 10 incoming calls. Each record holds up to 20 digits.
When the phone rings and caller information is received, the display will
show the last 12 digits of the callers number. If there is an identical
phone number stored in the phonebook, that phonebook name will be
displayed instead of the CID name.
Reviewing CID records
1. Press
when the phone is in standby. If the call log is not
empty, turns on and the caller name of the most recent CID
record is displayed.
2. Press OK to view the number.
3. Press OK again to see the date / time when the call was received.
4. Whether you are viewing the name, number or date/time, pressing
will display the next older record and the next newer record.
When
turns on, it means that received number is a new number.
CALLER ID