Oregon Scientific RAR621 User Manual

Page 13

For more information on the sensor see

"Remote Sensor THN122N" Section.

MINIMUM / MAXIMUM RECORDS

The MEM button is located in the main unit battery
compartment. Press MEM to toggle between current,
maximum (MAX) and minimum (MIN) records. To clear
the records, press and hold MEM for 2 seconds. A beep
will sound to confirm that the memory has been cleared.

RESET SYSTEM

The RESET button is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or Clock).

SAFETY & CARE

Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.

WARNINGS

This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the device
from those specified in the user instructions or any
unapproved alterations or repairs of the product.
Observe the following guidelines:

• Never immerse the product in water. This can

cause electrical shock and damage the product.

• Do not subject the main unit to extreme force,

shock, or fluctuations in temperature or humidity.

• Do not tamper with the internal components.

• Do not mix new and old batteries or batteries of

different types.

• Do not use rechargeable batteries with this

product.

• Remove the batteries if storing this product for a

long period of time.

• Do not scratch the LCD display.

The technical specification of this product and

contents of this user guide are subject to change without
notice. Images not drawn to scale.

Under the environment with electrostatic

discharge, the sample may malfunction and require user
to rest the sample.

NOTE

RAR621 English R4 OP

8/18/04, 5:29 PM

Black