Storing frequencies – Olympus MR-F30 Series User Manual
Page 54

54
Li
s
ten
in
g t
o
F
M
ra
di
o
MR-F30 Series
Storing frequencies
Storing frequencies manually
1
Receive the desired frequency, then press the
button.
2
Push up/down the
dial to select “Save Preset,” then press the
OK/EQ button.
3
Push up/down the
dial to select the registry number (P1 to P20),
then press the OK/EQ button.
The frequency is stored.
Storing frequencies automatically
1
Press the
button while the receiving screen is displayed.
2
Push up/down the
dial to select “Auto Preset,” then press the OK/
EQ button.
3
Push up/down the
dial to select “On,” then press the OK/EQ
button.
The receivable frequency is stored automatically.
Tip
When “Change Mode” is set to “Manual,” the current frequency can be stored by pressing the OK/EQ
button while receiving FM radio.
Note
If “Auto Preset” is set to “On,” frequency information previously registered will be deleted.
MRF30_E.book Page 54 Tuesday, July 12, 2005 3:04 PM