Onkyo CR-315DAB - Manual (Page 40)

40
Listening to the Radio—Continued
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band III and
L-Band for the multiplexes (i.e., stations) available in
your area.
Once the scanning process is complete, the first station
that was detected is selected.
Using the Auto Tuning Function Manually
If a new DAB station is introduced, or you move to a new
area, you can run the Auto Tuning function again.
1 Press the [MENU/NO] button.
2 Use the Previous and Next [
]/[ ] buttons to
select “Auto Tuning?” and then press [ENTER].
3 Use the Previous and Next [ ]/[ ] buttons to
select Worldwide or U.K., (see “Auto Tuning?” on
page 42), and then press [ENTER] to start the Auto
Tuning function.
The number of stations found and the scanning progress
are shown on the display.
To cancel Auto Tuning, press the [ENTER],
[MENU/NO/CLEAR] or [YES/MODE] button.
On the CR-515DAB, you can also use the front panel
controls.
1 Push the multi control.
2 Turn the multi control to select “Auto Tuning?” and
then push it.
3 Turn the multi control to select Worldwide or U.K.,
and then push it to start the Auto Tuning function.
To cancel Auto Tuning, push the multi control.
Listening to DAB Digital Radio
Press the [BAND] button repeat-
edly to select DAB.
When tuned into a DAB station, the
Tuned
indicator appears and the
DAB indicator as well.
On the front panel, press the [INPUT]
repeatedly to select DAB.
BAND
/
MENU/NO/
CLEAR
ENTER
Station name
Tuned indicator
DAB indicator