Playing a disc, Basic playback, General features – Sylvania 6720FDD User Manual
Page 37: Title menu, Disc menu
– 37 –
EN
01A11
PLAYING A DISC
BASIC PLAYBACK
Getting started
¡
Turn on the power of amplifier and any other com-
ponents, if necessary.
1
Press the POWER button.
¡
The power will turn on.
2
Press the OPEN/CLOSE button to open disc
loading tray.
3
Place the chosen disc in the tray, with the
label facing up.
CD
DVD-V
4
Press the PLAY button.
¡
The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
the PLAY button.
¡
When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU”.
5
Press the STOP button to stop playback.
NOTES
¡
When the DVD mode has been switched to the
TV/VCR mode, the DVD mode shuts down first and
then TV picture and sound appears in about 4 seconds.
Similarly, when the POWER button is pressed to turn
off in the DVD mode, this mode shuts down first and
then the TV/DVD/VCR’s power is turned off.
¡
A “prohibited icon” may appear at
the top-right on the TV screen dur-
ing operation, warning that a pro-
hibited operation has been encoun-
tered by the DVD or the disc.
¡
With DVDs that use titles for playback program sig-
nals, playback may start from the second title, or it
may skip these titles.
¡
During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.
GENERAL FEATURES
DVD may contain menus to navigate the disc and
access special features. Press the appropriate number
buttons or use the Arrow buttons (L/K/s/B) to high-
light your selection in the DVD main menu and press
the ENTER button to confirm.
NOTES
¡
Select DVD mode by pressing the SELECT button on
the remote control. Then, operate the DVD functions.
¡
Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
TITLE MENU
1
Press the TITLE button.
¡
The title menu will appear.
2
If the feature is not available,
symbol
may appear on the TV screen.
3
Press the Arrow buttons (L/K/s/B) to
select an item, and the ENTER button to
confirm selection.
DVD-V
DISC MENU
1
Press the DISC MENU button.
¡
The DVD main menu will appear.
2
If the feature is not available,
symbol
may appear on the TV screen.
3
If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selec-
tion.
4
Press the Arrow buttons (L/K/s/B) to
select an item, and the ENTER button to
confirm selection.
DVD-V
CALLING UP A MENU SCREEN
DURING PLAYBACK
For DVD-Vs
¡
Press the DISC MENU button to call up the DVD menu.
¡
Press the TITLE button to call up the title menu.
NOTE
¡
Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
TD900UA(P36-52).QX33 03.7.31 1:22 PM Page 37