Sylvania LD370SS8 - Manual (Page 40)

S
ETTING DVD
40
EN
DVD Audio Setting
Choose the appropriate audio settings for your equipment. It only affects
during the playback of DVD.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K / L] to select “DVD”, then press [ENTER].
Setup Setup
Press “ENTER” key to move to DVD Setup.
3
Use [Cursor s / B] to select “ ”, then press [ENTER].
AUDIO
ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
4 Use [Cursor K / L] to select the desired item, then press
[ENTER].
AUDIO
ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
5 Use [Cursor K / L] to select the desired item, then press
[ENTER].
[DRC] (dynamic range control) (Default: ON)
Set “DRC”.
This function is available only on the discs which are
recorded in the Dolby Digital format.
AUDIO
ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON : Compress the range between soft and loud
sounds.
OFF : No effects (original sound).
5
[DOWN SAMPLING] (Default: ON)
Set “DOWN SAMPLING”.
This function is available only on digital outputting of a
disc recorded in 96kHz.
AUDIO
ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON : When outputting in 48kHz.
OFF : When outputting the original sound.
Note:
When playing back a 96 kHz disc with the copyright
protection or when virtual surround is set to “1” or “2”, the
sound will be down sampled at 48 kHz even if the
“DOWN SAMPLING” is set to “OFF”. •
[DOLBY DIGITAL] (Default: BITSTREAM)
Set to “BITSTREAM“ when this unit is connected to a
Dolby Digital decoder. Available on DVD only.
AUDIO
ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
BITSTREAM : Outputs Dolby Digital signals.
PCM : Converts the Dolby Digital into PCM.
(2 channel)
6 Press [SETUP] to exit.
A74GCUE_LD370SS8 M2_EN.indd 40 A74GCUE_LD370SS8 M2_EN.indd 40 2008/04/04 16:00:58 2008/04/04 16:00:58