Oricom ECO80 - Manual (Page 23)

21
Advanced Settings
Advanced Settings
Setting the Recall time
Two recall timings are available. Short 100ms (Australia)
and Long 600ms (New Zealand).
, 4 or 5, Open the Menu, select “RECALL”
SHORT The current setting is shown
4 or 5, Select and confirm “SHORT” or “LONG”
R (Recall) button on PBX phone systems
If the telephone is connected to a PBX phone system
functions such as transferring calls and automatic call
back can be used via the R button.
R (Recall) button and Supplementary services
Your telephone supports the supplementary services
offered by your telephone network provider, such as
call waiting and conference calls. The supplementary
services can be used in conjunction with the R button.
Please contact your telephone network provider with
regard to enabling the supplementary services and
which recall time must be used.
Dialling pause (PBX ONLY)
When using some PBX phone systems, it takes a little
time before the dial tone becomes available. It is possible
to insert a pause after the number for the outside line so
that the number can be dialled in a continuous process
without having to wait for the dial tone.
2 sec Insert a dialling pause. “P” is shown in
the display
The pause can also be entered with the phone number
in the phone book.
Reset to default settings
You can reset your handset to its original default settings.
The phone book, calls and redial lists are not deleted
when you reset the handset.
, 4 or 5, Open the Menu, select “RESET”
, , Enter the PIN code and confirm