English – Vitek VT-1666 User Manual

Page 11

CLEAN AND CARE
• Before cleaning switch off the unit and

unplug it.

• Protect the control panel from water.

Wipe the panel with a soft, slightly damp
cloth.

• Keep the chamber clean. If there are

remaining of the products on the walls
of the unit remove them using a damp
cloth.

• If the working chamber is dirty use a soft

detergent.

• Do not use abrasives, wire brushes to

clean the unit inside and outside.

• Provide that no detergent gets into the air

and steam openings on the door of the
unit.

• Do not use detergent based on ammo-

nia.

• Use a damp cloth to clean external sur-

faces.

• Keep the door clean. Provide that no

crumbs accumulate between the door
and the panel as it prevents the door
from closing.

• Clean ventilation openings on the body

of the oven from dust and dirt.

• Regularly clean the glass tray and its

support; wipe the bottom of the working
chamber.

• Wash the glass tray and draft with a neu-

tral soapy solution. You can wash them in
a dish wash machine.

• Do not immerse the heated glass tray

into cold water: due to sudden tempera-
ture drop the glass tray can splinter.

ENGLISH

Problems and their solutions

Normal operation

The unit makes Interferences
in the reception of TV and radio
signals

During operation of the unit interferences in the recep-
tion of TV and radio signals can appear. The same in-
terferences appear during operation of small electrical
appliances such as a mixer, a vacuum cleaner and a
hair dryer. It is normal.

Low brightness of the backlight

If the microwave radiation level is low, the brightness of
the chamber backlight can be low as well. It is normal.

Steam accumulation on the
door, hot air output from the
ventilation openings.

During cooking, steam can evaporate from the prod-
ucts. Great amount of steam evaporates via the ventila-
tion openings but some part can accumulate on the
door. It is normal.

Troubleshooting

Problem

Possible cause

Solution

The unit does not switch on

The power cable plug is

not properly inserted in the

socket.

Pull the plug out of the

socket. After10 seconds

insert the plug into the

socket again.

Problem with the socket

Try to connect another

appliance to the same

socket

No heating

The door is not firmly

closed

Firmly close the door

1666.indd 11

24.06.2008 12:46:29