Omega Engineering OM-SQ2040 Series - Manual (Page 16)

Version 1.4 - March 2011 28923
Page 16
6.2 Control panel menu
Detailed below is a basic explanation of the top menu structure. For more information on
the whole menu structure please refer to the Help->Help Content->Loggers within
OMEGALOG ® .
6.2.1 Log Control
In this menu you can Arm (activate) or
Disarm (deactivate) the logger.
6.2.2 Meter
Here you can view each channel in Real
Time (at 1-2Hz). Use the enter key for a
graphical view of a channel.
6.2.3 Status
The Status menu gives you access to
information relating to the logger such as
memory and power supply voltage. You
can also override the alarm outputs in
here.
6.2.4 Setup
This contains menus for setting the
Language, Time, Date, basic Channel
Setup, storing and recalling setups and
Delayed start.
See 6.3 for more details on basic setup
6.2.5 Data Files
This menu allows you to copy data files to
an external memory card (if fitted) and
delete the data files held within the
loggers memory.
6.2.6 Tools
The Tools menu contains maintenance
type functions such as querying the
software version of the logger,
performing a self test and resetting the
logger.