Olympus FL-36 - Manual (Page 24)

47 46
CUSTOM SETUP
Custom setup allows each user to customize flash setup to suit his or her preferences.
Setup procedure
1. Turn the electronic flash on.
2. Press and hold the MODE button for more than 2 sec-
onds, until the setup mode display appears in the control
panel.
3. Press the MODE button momentarily to select the setup
mode.
4. TTurn the select dial to select the value.
5. Keep the MODE button pressed for more than 2 seconds
to exit from setup and return to the previous control panel
display.
3. Background screen sync
Slow shutter is used and the flash is emitted immediately
before the end of exposure period.
This makes it possible to take pictures of moving objects
such as car taillights with a streaming effect.
When the camera in use has a built-in flash, it can be used
simultaneously with the electronic flash.
• Advanced shooting techniques are possible. For example, you
can bounce the light from the electronic flash off the wall or ceil-
ing while using the camera’s built-in flash for a catch-light effect.
• With certain camera models, the built-in flash may be disabled
when the electronic flash is mounted on the camera’s hot shoe.
4. Combination with camera’s built-in flash
Note
The electronic flash control mode should be set to TTL AUTO or
FP TTL AUTO.