Taking a measurement – Omron Healthcare ELITE 7300IT User Manual

Page 30

The monitor stores measurement values for one user in the memory.
The guest mode can be used to take a single measurement for another
user.

USING THE GUEST MODE

No measurement values are stored in the memory when the guest mode
is selected.

1. Press and hold the START/STOP button for

3 seconds.

The Guest Symbol (

) appears on the display.

2. Release the START/STOP button.

The cuff starts to inflate automatically.

NOTE:

To stop the inflation, press the START/STOP button. The
monitor will stop inflating, start deflating and turn off.

3. Inflation stops and the measurement is started. When the measurement

is completed, your blood pressure and pulse rate appear on the display.

TAKING A MEASUREMENT