Turning on & basic operations, Turning on/off the av receiver, Turning on – Onkyo HT-R390 User Manual
Page 17: Turning off, Turning on turning off
17
En
Turning On & Basic Operations
Turning On/Off the AV Receiver
Tip
• See “Auto Standby” about a power management setting (
page 34).
Turning On
1
Press
ON/STANDBY on the front panel.
or
Press
RECEIVER followed by
ON/STANDBY on the remote controller.
The AV receiver comes on, the display lights.
Turning Off
1
Press
ON/STANDBY on the front panel.
or
Press
RECEIVER followed by
ON/STANDBY on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
ON/STANDBY
ON/STANDBY
RECEIVER
This manual is related to the following products: