Orion VERSAGO #5682 - Manual (Page 7)

7
When pointing a longer telescope tube, like a long focal length
refractor, at zenith, extending the tripod legs will help better
position the eyepiece. For heavier telescopes, we recommend
extending the tripod legs in order to give the mount a wider
stance; this will prevent the mount from becoming “tippy”.
For 5" or larger aperture telescopes, the telescope tube may
bump the azimuth tensioning knob when pointing near the
horizon. The rubber bumper will prevent any tube scratches or
dings if this happens. For smaller telescope tubes the rubber
bumper should not be needed, and can be removed.
tracking celestial objects
Celestial objects appear to move slowly across the sky
because of the rotation of the Earth on its polar axis. When
you observe an object through your telescope, you’ll see it drift
gradually across the field of view. To keep the object centered
in the field, use the handle to move the VersaGo as needed.
For these small, precise movements, you may need to read-
just the axis tensioning knobs. Keep in mind that objects will
appear to move faster at higher magnifications, because the
field of view is narrower.
5. care and Maintenance
If you give your VersaGo mount reasonable care, it will last a
lifetime. Store it in a clean, dry, dust-free place. Do not store
the mount outdoors, although storage in a garage or shed is
OK.
Your mount requires very little mechanical maintenance. It is
constructed of aluminum and has a black anodized finish that
is fairly scratch-resistant. If a scratch does appear, it will not
harm the mount. Dust, dirt, or moisture on the mount should
be wiped off with a soft cloth. If the mount needs more exten-
sive cleaning, use a household surface cleaning fluid.
When transporting the mount to an observing location, we
recommend removing the handle in order to prevent it from
being damaged. You can also fold the tripod legs together
once the accessory tray is removed. For extra portability, you
can also remove the VersaGo mount entirely from the tripod;
simply unthread the knob under the tripod head. To protect
your mount during transport, Orion offers optional soft pad-
ded carry cases.
6. specifications
Mount: Altazimuth
Material: Aluminum black
anodized throughout
Maximum load capacity: Approximately 15 lbs.
Maximum tube outer diameter: Approximately 7.5" (6"
aperture telescope)
Bearing surfaces: Teflon
Axis tensioning: Via knurled knobs
Pointing handle: Included, foam grip
Telescope connection: Requires Orion dovetail
mounting bar (not
included)
Tripod: Adjustable height,
includes accessory tray
Assembled weight: 12 lbs. 3 oz.