Oliso Touch & Glide - Manual (Page 7)

Auto-Lift system
Simply touch the iron handle and the iron
will sense your hand and lower. Any time
you release the handle the spacers will
automatically raise the iron to protect your
fabric.
overriding the Auto-Lift TM system
TM
To operate, place the iron on its soleplate on
a flat surface. Plug the iron into an outlet and
make sure the Auto-Lift
TM switch is in the on
( ) position.
If you wish to turn off the Auto-Lift TM system, move the switch on the back of the iron to the
off ( ) position. Your Touch&Glide TM will now operate like a standard iron. If the iron is left
in the horizontal position for more than 30 seconds, the Auto-Lift TM spacers will raise. This will
prevent the iron from burning your fabric or ironing surface. Touch the iron handle and the
iron will lower. You can restore Auto-Lift
TM by returning the switch to the on ( ) position.