Orion 3000 - Manual (Page 45)

User’s Guide 45
Enable/disable dhcp server
¾
dhcp lease-time { 30-2147483647 seconds}
Set dhcp server ip lease time
¾
dhcp dns add {1~4} {ip address}
Set dhcp server dns ip address, it allows maximum 4 dns setting.
¾
dhcp dns delete {1~4/all}
Remove dhcp server dns ip address setting.
Note: if NAT is enabling, the following DHCP command can bet set
¾
dhcp ip-pool add {start IP} {end ip}
Set dhcp server ip pool range
Example:
CM> dhcp ip-pool add 192.168.100.2 192.168.100.4
CM>show dhcp
TFTP Server IP address : 172.19.89.19
Cable Modem IP address : 10.71.135.99
Configuration file : DEF001.cfg
Lease time : 86400 (secs)
UTC time offset : -28800 (secs)
SystemLog Server IP address : 172.19.89.19
Router IP address : 10.71.128.1
SubnetMask : 255.255.240.0
DHCP server enable
NAT DHCP Server Pool Table :
NAT DHCP server support 20 IP pools
NAT DHCP server support 512 IP, Created 3 IP
Pool Index Begin IP End IP
1 192.168.100.2 192.168.100.4
Provision assigned DNS 68.4.16.30
Provision assigned DNS 68.6.16.30
DHCP server lease time : 1800
¾ dhcp ip-pool delete {1-20/all}
Delete dhcp server ip pool range
¾
dhcp reserve-mac add {ip address} {mac address}
Reserve the specific ip address for specific mac address