Onkyo AVX-280 - Manual (Page 5)

5
En
Installing the Batteries
Note
• If the remote controller
doesn’t work reliably, try
replacing the batteries.
• Don’t mix new and old
batteries or different
types of batteries.
• If you intend not to use
the remote controller for
a long time, remove the batteries to prevent damage from leak-
age or corrosion.
• Remove expired batteries as soon as possible to prevent damage
from leakage or corrosion.
Aiming the Remote Controller
To use the remote controller, point it at the AV receiver’s
remote control sensor, as shown below.
Contents
Important Safety Instructions ......................................... 2
Precautions ....................................................................... 3
Speaker Precautions ........................................................ 4
Package Contents ............................................................ 4
Features ............................................................................ 6
Front & Rear Panels ......................................................... 7
Speaker Package .............................................................. 9
Remote Controller .......................................................... 10
About Home Theater ...................................................... 11
Connecting the AV Receiver ......................................... 12
Turning On/Off the AV Receiver ................................... 20
Basic Operations ............................................................ 21
Listening to the Radio.................................................... 23
Recording........................................................................ 25
Using the Listening Modes............................................ 26
Advanced Setup ............................................................. 29
Controlling iPod ............................................................. 38
Controlling Other Onkyo Components ........................ 42
Troubleshooting ............................................................. 45
Specifications ................................................................. 49
About HDMI ..................................................................... 51
Using an RIHD-compatible TV, Player, or Recorder ... 52
Using the Remote Controller
Batteries (AA/R6)
Remote control sensor
AV receiver
Approx. 16 ft. (5 m)
Introduction
Connections
Turning On & Basic Operations
Advanced Operations
Controlling iPod & Other Components
Others
To reset the AV receiver to its factory defaults, turn it
on and, while holding down
VCR/DVR, press
ON/STANDBY ( ➔ 45).