Omron Healthcare GOSMART HJ-112 - Manual (Page 15)

1
SETTING THE STRIdE LENGTH
Setting range: 1'00'' to 4'00'' feet
The stride length flashes on the display.
1.
Press the MEMO/▲ Button to advance by
increments of 1 inch.
Press.and.hold.the.button.to.advance.the.
stride.in.4.inches.increments.
NOTE:
Press.the.MODE.Button.to.return.the.
stride.length.to.1'08''..
2.
Press the SET Button to the stride length.
The.number.of.steps.and.time.will.be.
displayed.
All the settings are completed.
To change the time, weight, or stride length after the setting is
completed:
1.
.Press.and.hold.the.SET.Button.for.2.seconds..
2.
.
Change.the.setting..
NOTE:
.
.If.setting.does.not.need.to.be.changed,.press.the.set.button.to.advance.
to.the.next.setting.