Omron Healthcare GOSMART HJ-112 - Manual (Page 10)

10
BATTERy INSTALLATION
1.
Remove the Screw on the Battery Cover
located on the back of the main unit.
Use.the.supplied.screwdriver.or.use.a.
commercially.available.small.screwdriver.to.
remove.the.screw.on.the.battery.cover..
2.
Open the Battery Cover.
3.
Insert the battery.
Place.the.positive.(+).side.of.the.battery.
(CR2032).upward..Insert.the.battery.in.the.
direction.of.the.arrow.as.illustrated..
4.
Replace the Battery Cover.
Insert.the.projected.portion.of.the.battery.cover.
as.illustrated..
Tighten.the.screw.on.the.Battery.Cover.
NOTES:
•..After.installing.the.battery,.set.the.time.of.
day,.weight.and.stride.length.
• Remove the protective film from the face
of.the.display.
Operating Instructions