Onkyo T-405TX - Manual (Page 18)

18
ACCUCLOCK
TUNING
T-405TX
MEMORY TIMER BAND
PRESET
CHARACTER DISPLAY
FM MODE
CLEAR
STANDBY/ ON
FM STEREO TUNER
MEMORY
FM MODE
√ PRESET®
† TUNINGπ
BAND
Listening to a stereo radio
station
When you tune in a stereo FM station, the STEREO
indicator lights up if the signal is sufficiently strong.
If the signal is weak, you can still listen to the
station in mono mode. In this case, tune in as
follows.
1
Press the FM MODE button.
The MONO indicator lights up.
STEREO
MHz
Displayed
MONO
FM MODE
CLEAR
2
Select the station you would like to
listen to using the TUNING † or π
button.
TUNING
Selecting preset stations
Follow the procedure below to select a preset
station stored in memory.
1
Select FM or AM using the BAND
button. (only for U.S. and Canadian
models)
BAND
Use the PRESET √ or ® button to
select the desired preset station.
PRESET
Clearing preset stations
You can clear preset stations from the preset memory.
1
Select the station as explained in
the previous section.
2
Press and hold the MEMORY but-
ton and press the FM MODE button
within a second.
“..... ..... ” appears on the display.
MEMORY FM MODE
CLEAR
Note
If you fail to press the FM MODE button while
holding down the MEMORY button immediately,
the AUTO MEMORY function will start operating.
Receiving stations