Optimus SCP-101 - Manual (Page 6)

6
dard AC or vehicle power, remove the batteries. Batteries
can leak chemicals that can destroy electronic parts.
USING AC POWER
You can power the SCP-101 using a 3V, 300-mA AC
adapter and a size H Adaptaplug
® (neither supplied).
Both are available at your local RadioShack store.
Cautions:
You must use a Class 2 power source that
supplies 3V DC and delivers at least 300
mA. Its center tip must be set to positive and
its plug must fit the SCP-101's DC 3V jack. Using an
adapter that does not meet these specifications could
damage the SCP-101 or the adapter.
• Always connect the AC adapter to the SCP-101 be-
fore you connect it to AC power. When you finish,
disconnect the adapter from AC power before you
disconnect it from the SCP-101.
!
14-1253.fm Page 6 Tuesday, July 27, 1999 12:50 PM