Omega Vehicle Security ISA RS-422 - Manual (Page 13)

Installation
OMG-ULTRA-SIO Page 9
Installation
System Installation
The OMG-ULTRA-SIO can be installed in any of the PC expansion slots. The
OMG-ULTRA-SIO contains several jumper straps for each port which must be
set for proper operation.
1.
Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the OMG-ULTRA-SIO into the slot. Make sure that the
adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.