Setting up your device – One for All Little Easy User Manual
Page 7
Setting Up Your Device
To set up the LITTLE EASY for your Television:
Press and release your LITTLE
EASY’s TV key. Then press
and hold down the MAGIC
key until the LITTLE EASY’s
red light blinks twice. (The
light will blink once and then
twice.)
Enter your three-digit TV
code using the number keys.
The red light will blink twice.
Now, aim your LITTLE EASY
at your Television and press
POWER. If your Television
switches off, your LITTLE
EASY is ready to run your
Television.
Write your code in the three boxes on page 22, for
quick, easy reference.
To control your Television, press TV first.
■ ■ ■ ■
■ ■ ■ ■
7
ONE FOR ALL
Fernseher
Admiral
087 093 264
163
Agazi
264
AGB
075
Aiko
216 009
Akai
208 351 037
191 163 284
009 218
Akiba
218
TV
2
3
1
Find your Television code in
the Set-Up Code section
(starting on page 23). Codes
are listed by brand name. The
most popular code is listed
first. Make sure your
Television is switched on.
4
Important notes:
– To set up your Video Recorder, follow the same
instructions above, only press the VCR key during
step 2.
– If your Video’s original remote control does not
have a power key, press PLAY instead of POWER.
– If your Device does not respond, follow steps 1-4
with each code listed for your brand. If none of the
codes listed for your brand operate your Device, then
try the search method described on page 10, even if
your brand is not listed at all.