beautypg.com

Quick reference guide – Omron Healthcare AUTOMATIC DIGITAL HEM-739 User Manual

Page 5

background image

4

QUICK REFERENCE GUIDE

1. Avoid eating, smoking, and exercising for at least 30 minutes

before taking a measurement.
2. Put your left arm through the cuff loop making sure that the

bottom edge of the cuff is approximately one-half inch above

the elbow.
3. Pull the end of the cuff so that the entire cuff is evenly

tightened around your arm and press the sewn hook material

firmly against the pile side of the cuff.Make sure that your

skin will not be pinched in the D-ring once you inflate the cuff

bladder. Immediately deflate the cuff bladder and readjust

the cuff if skin becomes pinched.
4. Sit in a chair with your feet flat on the floor and place your left

arm on a table so that the cuff is at the same level as your

heart.
5. Press the ON/OFF button.
6. After the Heart Symbol ( ) appears next to a zero on the

digital panel, press the START button.
7. Remain still throughout the entire reading.
8 When measurement is complete, the monitor alternately

displays your blood pressure and pulse on the digital panel

and automatically deflates the cuff.
9. Wait 5-10 minutes before taking another blood pressure

measurement.You may require more rest time between

readings depending on your individual physiological

characteristics.