Optoma Optoma EP615H - Manual (Page 16)

English
16
" The projector has the multilingual On-Screen Display(OSD) menus that allows you
to make image adjustments and change a variety of settings. In computer
source, the OSD will be the “Computer OSD”. In Video source, the OSD will
be the “ Video OSD”. The projector will detect the source automatically.
" To open the OSD menus, press the “Menu” button on the Remote Control or Panel
Control.
" To select among different menus, press the” Menu” button again. Then use
“Up” & “Down” keys to select different items and use “Right” & “Left” to adjust
your selection.
" To exit the OSD, press the “Freeze/CLR” button or choose the “Exit Menu” and
press “Enter” button.
OSD Menus
" Brightness
Adjusting the brightness of the image.
l Press the left key to darken the image.
l Press the right key to lighten the image.
" Color Temperature
Adjusts the color temperture. The range is from 6000
°
K to 9000
°
K . The factory default is 7900
°
K .
With the higher temperature, the screen looks colder; with the lower temperature, the screen
looks warmer.
" Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the
picture. Adjusting the contrast changes the amount of black and white in the image.
l Press the left key to decrease the contrast.
l Press the right key to increase the contrast
" Keystone Correction
Adjusts image distortion caused by tilting the projector.
How to operate
Language
" Language
You can display the multilingual OSD . User “ Up” and “ Down” key to select. The menus redrew
immediately.
Display Adjustment
Computer Mode: