Optimus AMX-10 - Manual (Page 6)

6
OPERATION
Follow these steps to operate the am-
plified speakers.
1. Set POWER OFF/ON to ON . The
power indicator lights.
2. Turn on the audio source.
3. If you connected the amplified
speakers to an audio source’s line
out jack, adjust
VOLUME MIN/MAX
to a comfortable listening level.
If you connected the amplified
speakers to an audio source’s
headphone jack, set the audio
source’s volume control to its mid-
position, then adjust
VOLUME MIN/
MAX to a comfortable listening
level.
4. Set BASS BOOST OFF/ON to ON to
enhance the low frequency
sounds.
Set TREBLE OFF/ON to ON to
enhance the high frequency
sounds.
5. To turn off the speakers, set
POWER OFF/ON to OFF . The
power indicator goes off.
6. Turn off the audio source. Then
disconnect the audio system from
the speakers.
40-1403.fm Page 6 Wednesday, August 11, 1999 7:47 AM