Optimus AMX-10 - Manual (Page 5)

5
CONNECTING THE
SPEAKERS
You can connect the amplified speak-
ers to the audio source’s headphone
or line out jack.
Caution: To protect your hearing, set
VOLUME MIN/MAX to its minimum lev-
el.
Follow these steps to connect the
speakers to your audio source.
1. Make sure POWER OFF/ON is set
to OFF .
2. Set the audio source’s power
switch to off.
3. Plug the amplified speakers’ 1 /
8
-
inch plug into the audio source’s
headphone or line out jack.
Note: If the audio source does not
have a
1 /
8
-inch jack, you need an
adapter plug, such as Cat. No. 274-
367.
40-1403.fm Page 5 Wednesday, August 11, 1999 7:47 AM