Oricom M800 - Manual (Page 5)

3
GETTING STARTED
If you have a Broadband line
If you connect your telephone to a line with a
broadband conne ction, you must connect an in
line filter (not supplied) between the telephone
socket and your phone base to ensure that your
broadband and m800 will work properly.
If you do not install the filter you will experience
interference on the cordless phone and your
Broadband may suffer dropouts. Please refer to
the user guide of the in line filter for installation.
In a home with broadband, every telephone, fax
or answering system must have a in-line filter
connected, not just the one at the telephone point
that your modem is connected to.
Additional in-line filters can be purchased from
electronic stores.
Telephone base and charger
installation
1. Plug the smaller end of the power adaptor
KPVQ VJG RQYGT LCEM CV VJG DQVVQO QH VJG
telephone base.
2NWI QPG GPF QH VJG VGNGRJQPG NKPG KPVQ VJG
LCEM CV VJG DQVVQO QH VJG VGNGRJQPG DCUG
3. Plug the other end of the telephone line into a
VGNGRJQPG YCNN LCEM
2NWI VJG NCTIGT GPF QH VJG RQYGT CFCRVQT KPVQ CP
electrical outlet not controlled by a wall switch.
Parts Checklist
&GRGPFKPI QP VJG OQFGN [QW JCXG RWTEJCUGF VJKU
RCEM UJQWNF EQPVCKP VJG HQNNQYKPI KVGOU
+H CP[ QH VJGUG KVGOU CTG OKUUKPI RNGCUG EQPVCEV
Oricom directly.
Single Twin
$CUG WPKV 1 1
%QTFNGUU JCPFUGVU 1
%JCTIKPI ETCFNG 0 1
Power adaptors 1
Line cord 1 1
User guide 1 1
*CPFUGV 4GEJCTIGCDNG 0K/*
8 O#J $CVVGTKGU