Oricom PMR3000R User Manual

Page 11

Baby monitor function

Monitor function

1. Press until and a flashing number appears in the centre of the display. With

the headset connected you will see in the top right corner of the display. Without the

headset you will see I.

2. Select sensitivity level 1, 2 or 3 by using or . Choose -

1- If you speak loudly, or are in a noisy environment.

2- Suitable for most applications.
3- If you speak softly, or are in a quiet environment.

Note: When you connect a VOX headset, the radio will automatically be set to the last
chosen VOX sensitivity level. If IVOX is active, the radio will automatically select
IVOX level.

Monitor function

This feature allows you to listen for weak signals on the current channel.
1. Pressing and holding allows you to monitor your channel for activity.
Note: It is good radio etiquette to monitor the channel for activity before you transmit,
to ensure that you do not interrupt other users already on the channel.

Baby monitor function

One of the units can be set as Baby monitor. The radio will transmit a signal when it is
activated by the crying baby or another sound in the room.
The PMR will no longer be able to receive signals to avoid that your baby is disturbed
during his/her sleep.
The other PMR must be set to the same channel and CTCSS code to receive the signal
from the Baby Monitor.

To set your radio as baby monitor
1. Press button until appears.
2. Press or button to set baby monitor sensitivity level to 1/2/3 to turn baby

monitor function ON.

3. Press to confirm the setting.

Note:
1. In standby mode, when speaking into the microphone, the radio will automatically

transmit like IVOX does.

2. The radio can’t receive or if you press any key it will not generate key tones so that

you will not disturb the baby.