Optimus SCP-87 - Manual (Page 9)

9
Using AC Power
To power the SCP-87 from a standard AC outlet, you
need an AC adapter, such as Cat. No. 273-1654.
Cautions:
• You must use an AC adapter that supplies 3
volts DC power and delivers at least 300 milli-
amps. Its center tip must be set to negative, and
its plug must properly fit the SCP-87’s
DC 3V
jack. The recommended adapter meets these
requirements. Using an adapter that does not
meet these requirements could damage the
SCP-87 or the adapter.
• Be sure you connect the adapter to the SCP-87
before you plug it into the AC outlet and that you
unplug the adapter from the AC outlet before you
unplug it from the SCP-87, to prevent damage to
the SCP-87 or the adapter.
14-1230.fm Page 9 Friday, July 2, 1999 10:26 AM