Omega Vehicle Security LV850 - Manual (Page 7)

LV850 LEVEL SENSOR
3 Level Sensor Installation
The Level Sensor may be installed in any attitude.
1. Ensure sufficient clearance space (see Fig. 1) in the container wall.
• Ensure a type 3/4" NPT or G3/4A thread in the container wall has been
provided.
2. Screw the Level Sensor into the threaded aperture using a recognized
sealing material.
3. When tightening the level sensor please use the flats provided (SW32).
Do not overtighten.
CAUTION
N O T E
3