Olympus FL-50R User Manual
Page 15
15
EN
Flash intensity value
(The light control range will
not be displayed while an
adjustment value is set.)
2
Turn dial B to select a flash intensity
value.
Turning the dial toward + will change the
value as follows: 0
+0.3
+0.7
+1.0...
+3.0.
Turning the dial toward – will change the
value as follows: 0
-0.3
-0.7
-1.0...
-3.0.
3
When the camera’s flash intensity
control mode is set, the actual flash light
intensity will be the total of the flash
intensity value set on the electronic
flash and that set on the camera.
The flash intensity value displayed on the
control panel is that of the electronic flash
only.
Flash intensity control
e.g.)
Selected
adjustment
value
Adjustment value
displayed
on the control panel
Actual flash
intensity value
Flash
+0.3
+0.3
+0.6
Camera
+0.3
x
Notes
In MANUAL and FP MANUAL mode settings on the camera will be
ignored.