Olympus FL-50R - Manual (Page 10)

1
2
10
EN
How to remove
1
Loosen the lock ring completely, then slide the electronic flash out
of the hot shoe.
2
Attach the hot shoe cover to the camera.
Using with a camera not equipped with hot shoe
If the camera has an external flash connector, connect the electronic flash using the
flash bracket and bracket cable (optional).
The electronic flash can be used as a wireless flash with cameras compatible with
the Olympus wireless RC flash system.
g “Wireless flash” (P.33)
The electronic flash can be used as a slave flash with cameras equipped with the
slave mode or manual flash mode.
g “Slave flash” (P.40)
4
Slide the electronic flash all the way into
the hot shoe until it stops with a click
(1).
5
Turn the lock ring as far as it will go in
the direction of LOCK (2).