Omega OSXL685 - Manual (Page 14)

11
This infrared thermometer has a USB PC interface. It
comes with a USB cable and CD software. Install the PC
software before connecting the thermometer to the PC
USB port. The minimum PC system requirements are:
• Windows XP
• 64 MB of RAM
• 5 MB of Disk space
After completing the software installation, run the program
and connect the thermometer to the PC using the USB
port. Turn on the thermometer by pulling the trigger. After
a few seconds the PC recognizes the thermometer
connection and a USB icon appears on the thermometer’s
display. The PC now shows the same target temperature
as what is displayed on the thermometer. The
thermometer's trigger is locked by the USB connections so
there is no need to continue pulling the trigger. The
following picture is what you see on the PC.
The target temperature is displayed in either °F or °C.
Then the Date (yy-mm-dd) and Time
(Hour:Minute:Second) are displayed. You can switch
between °F and °C temperature display by clicking on the
unit of measurement (°F or °C).
5. PC Interface (OSXL689)