Optimus SCP-103 User Manual

Page 8

Using AC Power

You can power the SCP-103 using a 3V, 300 mA AC adapter
and a size H Adaptaplug

(neither supplied). Both are avail-

able at your local RadioShack store.

Cautions:

You must use a Class 2 power source that sup-
plies 3V DC and delivers at least 300 mA. Its
center tip must be set to positive and its plug

must fit the SCP-103's

DC 3V

jack. Using an adapter that

does not meet these specifications could damage the
SCP-103 or the adapter.

• Always connect the AC adapter to the SCP-103 before

you connect it to AC power. When you finish, disconnect
the adapter from AC power before you disconnect it from
the SCP-103.

Follow these steps to connect an AC adapter to the SCP-103.

1. Set the adapter's voltage switch to 3V.

2. Insert the Adaptaplug into the AC

adapter's socket. Line up TIP on
the plug with +POS on the socket.

3. Insert the barrel plug into the

SCP-103's

DC 3V

jack.

4. Plug the AC adapter into a stan-

dard AC outlet.

14-1255.fm Page 8 Tuesday, July 27, 1999 10:47 AM