Setting the clock – Optimus SCP-103 User Manual
Page 10
10
3. Insert the plug into the SCP-103's
DC 3V
jack.
4. Plug the adapter into the vehicle's cigarette-lighter
socket.
Note: If the SCP-103 does not operate when you turn it on,
remove the DC adapter from your vehicle's cigarette-lighter
socket and check the socket for debris. Also, check the fuse
in the adapter and your vehicle's fuse block.
SETTING THE CLOCK
1. In the time mode, press
MEMORY/CLOCK
. The currently
set time flashes.
Note: If you do not press
HOUR
or
MIN
within 5 seconds,
the currently set time stops flashing. If that happens,
repeat this step.
2. Repeatedly press
HOUR
until the display shows the cor-
rect hour. To rapidly advance the hours, hold down
HOUR
.
MEMORY/
CLOCK
MIN
HOUR
14-1255.fm Page 10 Tuesday, July 27, 1999 10:47 AM