Olympus SCPH-10130U - Manual (Page 19)

If you select “RGB”, the following will happen.
●
The Eye-Trek display will be in black and white, and there will be no sound.
● When you play back a disk, the Eye-Trek display may have static or distortions, but this is not a
malfunction. Remember to take the disk out of the disk tray before changing the setting to “Y Cb/Pb Cr/Pr”.
ENGLISH
E-19
B r o w s e r
System Configuration
Enter Version
؂
Ņ
Display the “PlayStation ® 2” main menu on the Eye-Trek using the “PlayStation ® 2”
analog controller. (For more details, see “Using the main menu” in the “PlayStation ® 2”
instruction manual.)
When the main menu appears, perform the following steps.
1 Select “System Configuration” using the “PlayStation ® 2” analog controller’s up and down
directional buttons, then press the
؂
button (Enter).
● Selected items are highlighted.
2 Select “Component Video Out” using the “PlayStation ® 2” analog controller’s up and down
directional buttons, then press the
؂
button (Enter).
3 Select “Y Cb/Pb Cr/Pr” using the “PlayStation ® 2” analog controller’s right and left
directional buttons, then press the
؂
button (Enter).
“PlayStation
®
2” SYSTEM CONFIGURATION
Press the
⅜
button (Back) on the “PlayStation ® 2” analog controller to return to the main
menu.
Press the (open) button on the front of the “PlayStation ® 2” main unit, then insert a
disk.
Press the (standby) /RESET button on the front of the “PlayStation ® 2” main unit.
( Refer to the “PlayStation ® 2” instruction manual to play back the disk.)
Once an image appears on the Eye-Trek, go to “ADJUSTING THE AUDIO/VIDEO” in this
instruction manual. (
੬
pg. 21)
1
2
3
4
System Configuration
Component Video Out
Y Cb/Pb Cr/Pr RGB
Enter Back