Olympus SCPH-10130U - Manual (Page 16)

E-16
WATCHING VIDEO
Before you can start viewing “PlayStation ® 2” games/DVD videos, make sure that “System
Configuration”— “Component Video Out”— “Y Cb/Pb Cr/Pr” is selected in the main menu of the
“PlayStation
® 2”. If “RGB” is selected, change the setting to “Y Cb/Pb Cr/Pr” by referring to pg. 19,
“PlayStation ® 2” SYSTEM CONFIGURATION.
Notes:
●
Make sure that this product is connected to the “PlayStation ® 2” correctly before changing settings
on the “PlayStation ® 2” (
੬
pg. 13).
●
This product only supports “Y Cb Cr” video input signals with the Multi-AV plug. “Pb Pr” is not
supported.
●
Refer to the “PlayStation ® 2” instruction manual for playing back disks and other functions.
SETTING UP THE “PlayStation
®
2”
Turn on the MAIN POWER switch on the rear of the “PlayStation ® 2” main unit.
●
The (standby) indicator on the front lights up in red.
Press the (standby) / RESET button on the front of the “PlayStation ® 2” main unit.
●
The (standby) indicator lights in green.
●
Make sure that there is no disk in the disk tray before turning the power on. If there is a disk
in the tray, remove it before going on to the next step.
1
2