Oreck SIMPLY AMAZING APU255 - Manual (Page 4)

Plug cord into electrical outlet.
Power Switch
Push power switch to “ON” (l) position.
4
O perating I nstructions
ELECTRIKBROOM
POWER SWITCH
Power Nozzle Operation
Your ORECK ELECTRIKBROOM cleaner features a power
brush nozzle designed for effective cleaning on all types
of carpets or bare floors.
When cleaning rugs or floors, glide the nozzle with slow,
easy strokes.
For deep cleaning carpets, depress the powerbrush switch
to “ON” (l) position, then glide the nozzle with slow, easy
strokes. For bare floors and light rugs, you may stop the
powerbrush roll by switching back to the “OFF” (0)
position.
NOZZLE
POWER SWITCH
Swivel Nozzle
The swivel nozzle feature allows you to clean under
furniture easily. Simply twist cleaner to side until the unit
lies flat and parallel to the floor. Then guide the nozzle
into hard to reach places.
SWIVEL NOZZLE
OPERATION
Cord Restraint
A cord restraint clip is conveniently molded into the handle
to lift cord out of your way while vacuuming.
CORD RESTRAINT
Telescopic Handle
To adjust the handle height, simply grasp handle grip and
rotate collar lock at lower end of handle counter-
clockwise to loosen. Then slide handle up or down to
desired height. Gently tighten collar lock down clockwise
onto threads to lock handle into place.
COLLAR LOCK
T o S tore the C leaner
Wrap the power cord around rear of unit. For compact
storage, retract telescoping handle down. Hang cleaner
on a hook from the opening located at the top of the
handle.
The convenient ORECK ELECTRIKBROOM vacuum cleaner
is always at your fingertips for quick clean-ups anywhere.
NOTE: These cleaners do not stand upright
alone. Make sure the cleaner is properly
supported when not in use or unattended.