Oreck Grab It & Steam It 22082-01 - Manual (Page 7)

7
E N G L I S H
Operation
continued
Align and attach Velcro
®
on the microfiber steam mop pad to the Velcro
®
on the microfiber
steam mop pad holder.
To attach the Grab-It & Steam-It’s microfiber steam mop pad holder, place foot on release pedal
and gently push down, lower the power head onto the microfiber steam mop pad holder and
LIGHTLY press down to snap into place.
NOTE: Never operate the steam mop without the microfiber steam mop pad in place.
Grasp the water tank release lever and pull forward to remove the water tank.
Remove cap from the water tank bottom and fill with water. Replace the cap and reinstall the
water tank.
NOTE: Do not attempt to use steam mop without water in tank.
1
2
3
1 2
3 4
4
Release Pedal
Steam Mop Operation: