Picture problems, The picture is out of focus, The picture is too bright – Olympus C-200 Zoom EN User Manual
Page 150: The picture is too dark
140
Picture Problems
The picture is out of focus
• The camera was jarred when the shutter button was pressed.
➜ Hold
the camera firmly and press the shutter button smoothly.
• The viewfinder AF target mark was not positioned on the subject.
➜
Position the autofocus frame on the subject, or use the focus lock.
• The lens is dirty.
➜ Clean the lens with a soft, dry cloth.
• The mode was not selected correctly.
➜ Shoot in the macro mode
where the subject is within the range of 0.2m (8
″) to 0.8m (31″). For
greater distances, shoot in the standard mode.
• The shutter button was pressed while standing directly in front of the
camera when using the selftimer.
➜ When using the selftimer, press
the shutter button while looking into the viewfinder, not while standing
in front of the camera.
• The flash was needed to take a clear picture, but the camera was set
to No Flash.
➜ The shutter speed become slower and the exposure
time becomes longer, so use the tripod or hold the camera as steady
as possible to avoid camera movement.
• Quick Focus was used in the wrong focal range.
➜ Use the correct
Quick Focus setting for the distance you’re shooting at.
The picture is too bright
• The flash is set to fill-in flash mode.
➜ Set the flash a different mode.
• The subject being shot is excessively bright.
➜ Use the exposure
compensation feature, or change the angle of the camera.
The picture is too dark
• The flash was blocked by a finger.
➜ Hold the camera correctly,
keeping your fingers away from the flash.
• The subject was out of the working range of the flash.
➜ Shoot within
the flash working range.
• The flash mode is set to No Flash despite that lighting conditions
require a flash.
➜ Change the flash mode setting to one appropriate
for the surrounding lighting conditions.
• The subject was too small or was backlit.
➜ Set the flash to fill-in
mode, or use the spot metering mode.
• The picture was taken in the sequence mode.
➜ Pictures will appear
dark in the sequence mode because of the fast shutter speed,
especially in dim light.