Optoma RS232 - Manual (Page 26)

26
English
User Controls
 Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.
 (
#1
) “Saturation” and “Tint” are only supported in Video mode.
 (
#2
) For XGA model only.
 (
#3
) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.
 (
#4
) “3D Sync Invert” is only available when 3D is enabled.
 (
#5
) “Signal” is only supported in Analog VGA (RGB) signal.
 (
#6
) MIC volume can also be controlled by setup  volume in OSD
Main Menu Sub Menu Settings
Setup Projector ID 0~99
Mute On / Off
Volume 0~10
Audio Input
Advanced Logo
Logo Capture
Closed Captioning
Off / CC1 / CC2
Exit
RS232 RS232 / Network
Network Network State
DHCP
IP Address
Gateway
DNS
Apply
Yes / No
Exit
Options Source Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Background Color Black / Red / Blue / Green / White
Advanced Direct Power On On / Off
Auto Power Off (min.) 0~180
Sleep Timer (min.) 0~995
Power Mode (Standby) Eco. / Active
Exit
Lamp Settings Lamp Hours
Lamp Reminder
On / Off
Brightness Mode STD/Bright
Lamp Reset Yes / No
Exit
Reset
#6
Default / Audio1(Phone jack) / Audio2
(RCA R/L) / MIC
Optoma / User
Subnet mask