Mx3 plus english, 8 technical data – Omron Healthcare MX3 Plus User Manual
Page 9

MX3 Plus
English
9
Product name
OMRON MX3 Plus
Model
HEM-742-E
Display
Digital LCD
Measuring range
Blood pressure: 0 - 299 mmHg / Pulse: 40 - 180 beats/minute
Accuracy
Pressure: ± 3 mmHg
Pulse: ± 5% of display reading
Inflation
Automatic by electric pump
Deflation
Automatic pressure release valve
Rapid pressure release
Automatic exhaust valve
Pressure detection
Capacitive pressure sensor
Measuring method
Oscilliometric
Power supply
4 x 1.5V alkaline batteries type (LR6) AA
AC adapter (optional part)
Battery life
New batteries will last for approximately 300 measurements
Operating temperature/humidity
+10°C to +40°C / 30% to max. 85% relative humidity
Operating environment
Free from excessive vibrations, shocks, magnetic fields,
electrical noise, etc.
Storage temperature/humidity
-20°C to +60°C /10% to max. 95% relative humidity
Weight
Approximately 350 gr including cuff, excluding batteries
Outer dimensions
Approximately 118 mm (W) x 90 mm (H) x 130 mm (D)
Cuff dimensions
Approximately 145 mm (W) x 480 mm (L)
Arm circumference
22 cm to 32 cm
Accessories
Cuff, instruction manual, guarantee card, blood pressure pass
Optional parts
Large cuff for arm circumferences between 32 - 42 cm, AC adapter
Note
Subject to technical modification without prior notice
= Type B
0197
Manufacturer
OMRON MATSUSAKA Co., Ltd. Japan
EU-representative
OMRON HEALTHCARE EUROPE B.V., Kruisweg 577, NL-2132 NA
Hoofddorp
This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood
pressure monitor is designed according to the European standard EN1060, Non-invasive
sphygmomanometers Part 1: General Requirements and Part 3: Supplementary requirements for
electromechanical blood pressure measuring systems.
8 Technical data
compartment and insert four new identical
1.5V alkaline batteries type AA LR6
batteries.
Spare parts
• Due to high company quality standards,
OMRON considers the main unit as a
non-serviceable part because the need
for proper calibration after replacement
of high tech components.
Attention! Disposal of batteries
and the OMRON MX3 Plus
should be carried out in
accordance with the national
regulations for the disposal of
electronic products.