beautypg.com

Real-time counter – Optimus - Katadyn Products Inc. OPTIMUS MODEL 110/MODEL 60 User Manual

Page 24

background image

24

Notes:

• If you leave the VCR in the freeze-frame

mode for 3 minutes, the VCR stops playing
the tape.

• To reduce or eliminate jitter in the freeze-

frame picture, press and hold

CH

s/t until

the picture is clear.

Frame Advance

During freeze-frame, you can advance the pic-
ture one frame at a time by repeatedly pressing

SLOW

. This feature works best with video cas-

settes recorded at the SP or EP speed. Press

PAUSE

to return to normal playback.

Slow Motion

To start slow motion playback, while a tape is
playing, press

SLOW

. Press

SLOW

again or

PLAY

to return to normal playback.

Notes:

• During slow motion, the sound is muted

and the picture quality is lower than during
normal playback. Slow motion picture qual-
ity is best with tapes recorded at the SP or
EP speed.

• If you leave the VCR in the slow-motion

mode for 3 minutes, the VCR stops playing
the tape.

• If the slow-motion picture is poor, press

and hold

CH

s/t until the picture improves.

One Minute Skip

You can skip over unwanted material on the re-
corded tape, such as commercials. Press

ZERO/1MIN

during playback. The VCR fast for-

wards over 1 minute of recording, then re-
sumes normal playback.

REAL-TIME COUNTER

Using the Counter

Your VCR’s counter shows how long a tape
has been running. To display the counter on
the TV screen, press

DISPLAY

on the remote

control.

Notes:

• The real-time counter might stop if you

fast-forward or rewind through a blank sec-
tion on the tape. This is normal.

• You can press

COUNTER RESET

to reset

the counter to

0:00:00

.

Using the Zero Search Function

You can reset the counter to

0:00:00

at any

position on the tape and then return to that po-
sition.

Follow these steps to use the zero search func-
tion.

1. Press

COUNTER RESET

once so the

counter appears on the TV screen.

2. Within 5 seconds, press

COUNTER RESET

again at the location you want to return to
later. The counter resets to

0:00:00

.

3. When you want to return to the selected

location, stop the tape, then press

ZERO/

1MIN

. The tape rewinds or fast-forwards

and automatically stops at the location you
selected in Step 2.

16-547.fm Page 24 Tuesday, July 20, 1999 4:45 PM